high gloss cupboard doors with a curved
ceramic basin
684 Twitter Followers
Saniflo Technical
Information,
Ideas & Designs
We Stock Many Saniflo Products for your perfect
Bathroom Suite
Brochures Downloads
You can download the Saniflo brochures and leaflets in PDF
format.
To be able to open PDF documents you require the free Acrobat Reader software.
Full installation
instructions are available in Acrobat PDF format for the following
products (click to select):
2. Small bore discharge pipework
securely clipped with a 1:100 gradient to remote soilstack.
1. The use of small bore 22mm
discharge pipework enables installation across joists without
structural weakening.
3.
Saniplus receives waste water from bathroom appliances via 11/4
inch pipework with a 1:40 gradient.
4. Finally, the
installation is checked for correct operation and pump function
time.
Directly
vertical
All vertical lifts should rise as directly above the unit as possible.
Any initial horizontal run from the unit prior to a vertical lift should
not exceed 30cm. Only one lift is permitted, at the start of the run,
with a 1:100 fall from the high point.
Not
direct fall
Where the point of discharge into the soil stack is significantly lower
than the base of the unit, an anti-syphon valve will need to be fitted
at the highest point in the pipe run in order to avoid syphonage of the
water seal in the unit. Alternatively use larger bore pipework for the
vertical drop to ‘break’ the syphon.
Bends
Bends should be ‘smooth’ and not ‘elbows’. When utilising cpvc plastic
22mm pipework we recommend 2 bends together to form a right angle.
Ensure all pipework susceptible to freezing is adequately lagged.
Electricity
Before attempting any maintenance or servicing, the units must be
disconnected from the electricity supply. The electrical connection is
via an unswitched fixed wiring connector with a 5 amp fuse.
Inlet
pipework
The units generally accept waste water by gravity. They do not suck in
water. All pipework into the units must have a positive gravity fall
(1:40). Exceptions are Vite and Best which will also accept pumped waste
from dishwasher or washing machine.
Easy
access
The unit should be easily accessible and removable in the event of
maintenance being required.
Discharge pipework
To avoid dipping and build up of residual water and subsequent blockage
all discharge pipework should be supported in accordance with
manufacturers specifications and installed with a minimum 1:100 fall to
the soilstack.
All
pipework should be either copper or CPVC conforming to BS7291.
Do not use flexible
or push-fit pipework.
For
long horizontal runs where 22mm pipework is used this should be
increased to 32mm after approximately 12 metres to eliminate risk of
trap siphonage. NB: Our pumping systems are designed for the disposal of
normal organic waste product, water or paper. They are not intended to
replace kitchen waste or sanitary waste disposal units.
Bathroom
City Ltd. Company
based in United Kingdom - Vat Number 661259335 - Registered Office: Unit 15 Tyseley Industrial Estate,
Seeleys Road, Tyseley, Birmingham, B11 2LQ - Companies House Registration
No. 03075399
Amington Showrooms &
Store, Amington Road, Tyseley Business Estate, Birmingham, England B25 8ET Seeleys Showrooms,
Factory Outlet, Warehouse & Deliveries : Unit 15, Seeleys Road, Industrial
Estate, Birmingham,
West Midlands, England B11 2LQ, United Kingdom
